Self-propelled handling machinery with gantry and fork as working devices. Can be used for loading, unloading and stacking goods. After changing the working device, it can also be used for loading and unloading of special items and bulk materials.
The best forklift consists of three main parts: the power unit, the wheeled chassis and the working device. The working device includes a door frame, a chain, a fork frame, a fork and a hydraulic cylinder. The gantry is a telescopic structure that is hinged to the axle or frame and can be tilted back and forth by tilting the hydraulic cylinder to facilitate loading and unloading of goods and goods. The lifting hydraulic cylinder moves the fork frame with the fork along the inner door frame through the chain transmission, and the outer door frame of the inner door frame fork expands and contracts up and down, so that the forklift can lift the cargo to a lower height. High height.
Riggerte forklift parts are indicated by the power unit, the battery forklift and the internal combustion forklift. According to the structural characteristics of the forklift, it is divided into straight fork balance weight, leg type, forward movement type, side fork type and special forklifts for various special purposes. Among them, straight fork forklift trucks are most commonly used. 1 Straight fork balance heavy forklift. The fork is mounted on the front end of the car body and extends out of the center line of the front wheel. In order to balance the overturning moment generated by the weight of the cargo, a balance weight is installed at the rear of the vehicle body, and the forklift is moved forward and backward to perform unloading of the cargo during the operation. 2-legged forklift. The two arm-shaped legs extend forward, and the front end of the leg is equipped with a small-diameter wheel. During operation, the fork is inserted into the bottom of the cargo together with the leg, and then the fork is lifted. Since the cargo is located in the bearing surface of the wheel, the vehicle stability is good. 3 reach trucks. It is a variant of the dog-legged forklift. Its fork can move forward and backward in the longitudinal direction of the forklift. When the cargo is loaded and unloaded, the fork extends. When driving, it returns to the middle of the vehicle body, and the stability of the whole vehicle is good. 4 side forklift trucks. The door frame and the fork face the side of the forklift, which is located in the middle of the car body and can move together in the lateral direction. It is suitable for carrying long cargo. When the forklift is driving, the cargo is placed on the platform of the car body, and the stability of the whole vehicle is good.
The main technical parameters of the forklift are the rated load and the maximum lifting height. The excavator forklift parts are not only highly efficient, but also easy to change. In recent years, they have developed rapidly. More than 30 kinds of workable devices have been widely used. For example, the side clamp device can be used to carry oil drums and bales; the reloading string device can transport steel coils and cement pipes; the lifting boom and hook can be used to lift various heavy objects; and the bucket can be loaded and unloaded. Materials and so on. The forklift is flexible and adaptable, and has high working efficiency. The forklift can realize the mechanization of loading and unloading and handling, reduce the damage of the goods, improve the utilization of the warehouse volume and the safety of the operation, so it is widely used by various departments.