Side Navigation

Forklift parts maintenance kit details and replacement cycle

Forklift parts maintenance kit details and replacement cycle

1, the new car maintenance cycle is 100 hours, replace the oil, oil filter, diesel filter, air filter. Check all parts of the lubricant, such as door frames, chains, tilting cylinders, door sills, steering axles, etc. Clean the engine lubrication system and replace the oil.

2. After the working hours of the forklift reaches 400 hours, it is a cycle, and the oil, oil filter, diesel filter and air filter are replaced. Check all parts of the lubricant, clean the engine lubrication system, and replace the oil.

3. When the working hours of the forklift reaches 700 hours, it is a cycle. Replace the oil, oil filter, diesel filter, air filter, and other positions: gantry, chain, tilt cylinder, gantry, steering axle The grease is injected, the bearings in the front and rear wheels are cleaned, and the lubrication is performed according to the lubrication meter.

4. After the working hours of the forklift reaches 1000 hours, it is a maintenance cycle. Replace the oil, oil filter, diesel filter, air filter, gear oil, transmission oil, gearbox filter and hydraulic oil. Check all parts of the lubricant, clean the engine lubrication system, and replace the oil.

5. After the working hours of the forklift reaches 1400 hours, it is a cycle, and the oil, oil filter, diesel filter and air filter are replaced. Check all parts of the lubricant, clean the engine lubrication system, and replace the oil.

6. After the working hours of the forklift reaches 1,700 hours, it is a cycle. Replace the oil, oil grid, diesel grid, air grid, and other positions: door frame, chain, tilting cylinder, door frame tile, steering axle for oil injection, front and rear wheels The bearings are cleaned and lubricated according to the lubrication table.

7. When the working hours of the forklift reaches 2000 hours, it is a cycle, and the oil, oil filter, diesel filter and air filter are replaced. Check all parts of the lubricant, clean the engine lubrication system, and replace the oil.

8. After the forklift has reached 2400 hours, it will be replaced by oil, oil filter, diesel filter, air filter, gear oil, gearbox oil, gearbox filter and hydraulic oil. Check each system lubricant, clean the forklift engine lubrication system, and replace the oil.

9. After the forklift has reached 2700 hours, it will be replaced by oil, oil filter, diesel filter and air filter. Check all parts of the lubricant, clean the engine lubrication system, and replace the oil.

10. When the working hours of the forklift reaches 3000 hours, it is a cycle, and the kits for maintenance of forklifts such as oil, oil grid, diesel grid and air grid are replaced. And lubricate the position of the forklift: door frame, chain, tilting cylinder, door frame tile, steering axle for grease injection, bearings in front and rear wheels for cleaning, lubrication according to lubrication table.

If you are interested in this content, please contact us and you will find out more about it.(https://www.riggerte.com/

Just say hello and Leave Your Messages!